cart  View Cart | Your Account | Help  







Frequently Asked Questions

Price

How Do I Apply Designer Cords?

How Do I Install Multiple Cords in One Cover?

How Many Cords Can One Designer Cord Cover Accommodate?

How Long are the Designer Cords?

How Can I Shorten an Electrical Cord with a Designer Cords Cover?

What Color Designer Cord Do I Use?

How Do I Clean My Designer Cords?

How Do I Secure My Designer Cords Cover So It Stays In Place?

My Chandelier Chain is Longer Than 5 feet - What Do I Do?


What is the Return Policy?

PRICE:
Lamp Cord Covers $30
Chandelier Chain Covers
$37
Kordrap
$22.50
(plus shipping and handling)

- top -

How Do I Apply Designer Cords?

Lamp Cord Covers

  1. Insert plug into opening of tube and guide through to opposite open end until cord is completely through tube
  2. Secure tube & electrical cord with one hand. Begin sliding fabric off tube in opposite direction of plug. Once all fabric is off tube, slide electrical cord out of tube.
  3. Secure each end of designer cord with enclosed adhesives: secure to lamp & end of plug where the plug meets the electrical cord. (see video)

Chandelier Chain Covers

  1. Wrap the cover around the chain.
  2. Starting with small sections at a time, peel the paper to expose the adhesive.
  3. Overlap the end seams placing the seam with the adhesive over the bare seam.
  4. Continue until completely applied then evenly place cover over entire chain to desired appearance.

NOTE: Snuggly wrap the cover at the top of the chain to secure cover in place

KORDRAP

  1. Apply enclosed Plug Wrap to cover the plug by wrapping the fabric around the plug, peel paper to expose adhesive then press fabric seam in place to secure it closed.
  2. Lay long cover on flat surface and place electrical cord in the middle of cover.
  3. Beginning at the base of the lamp, fold surged end (end without the adhesive) over electrical cord, peel paper to expose small section of adhesive, overlap adhesive end on top of surged end and press to secure closed.

NOTE: Best if applied in small sections at a time

(Always unplug electronic devices before applying or securing Designer Cords)

- top -

How do I install multiple wires in one Designer Cord?
You would need to purchase our Large Lamp Cord Cover or our Chandelier Chain Cover to cover multiple wires.

Covering Multiple Wires with LARGE LAMP CORD COVER:

  1. Insert plug into opening of tube and guide through to opposite open end until cord is completely through tube
  2. Then insert the second plug into the opening of the tube and guide the cord through to the opposite end until the cord is completely through the tube.
  3. Continue this process until all cords are through the tube.
  4. Continue by following the rest of the steps above on how to apply the Designer Cord. (see video)

Covering Multiple Wires with CHANDELIER CHAIN COVER:

  1. Gather cords together.
  2. Wrap the Chandelier Chain Cover around the gathered cords beginning at the base of your electronic devises.
  3. Peel paper to expose adhesive small sections at a time, overlap the ends of the cover, and press together to secure closed.
  4. Continue step 3 until cover is completely applied, then spread cover evenly over the wires.

- top -

How many cords can one Designer Cord accommodate?

Small Lamp Cord Cover
Two (2) - three-prong cords

Large Lamp Cord Cover
Four (4) - two-prong cords
Two (2) - three-prong cords
Six (6) computer cords

Chandelier Chain Cover
One (1) - chandelier chain
Eight (8) - two-prong cords
Six (6) - three-prong cords
Ten (10) - computer cords

KORDRAP
One (1) - two-prong cord
One (1) - three-prong cord
One (1) - cable cord
Two (2) - telephone cords

- top -

How long are the Designer Cords?

Small Lamp Cord Cover
2 inches wide and 9 feet long

Large Lamp Cord Cover
2 inches wide and 9 feet long

Chandelier Chain Cover
3 inches wide and 5 feet long when applied (Covers are pre-gathered)

KORDRAP
1/2 inch wide and 9 feet long when applied

- top -

How can I shorten an electrical cord with a Designer Cords Cover?
EASY! Our patented TUBE APPLICATION allows you to quickly and easily shorten any cord. First, gather the electrical cord to the desired length and wrap it with the enclosed wire tie. Remove the desired length of Designer Cord from the tube, cut the fabric and place it back in the tube. Finally follow the steps above on how to apply the Designer Cords. (see video)

- top -

What color Designer Cord do I use?
Select a Designer Cord similar or to compliment your wall color to camouflage an electrical cord or choose a striking color to accent your décor.

- top -

How do I clean my Designer Cord?
SIMPLE! Dust your covers as you would your lamp shades.

- top -

How do I Secure My Designer Cords Cover So It Stays In Place?
Each Designer Cord has small adhesive squares located at each end of the cover to secure it to the base of the lamp and to the plug. (see video)

- top -

My Chandelier Chain is Longer Than 5 feet - What Do I Do?
If your chain is longer than 5 ft apply two or more covers. Designer Cords Chandelier Chain Cover were designed with this in mind. Our adhesive closure allows you to easily gather the covers together to make the application of several cover look one solid cover. Align the seams together and gather to a desired appearance.

Use on UL approved cords only!

(Always unplug electronic devices before applying or securing Designer Cords)

- top -

What is the Return Policy?

Retail Orders Only
We accept returns for full reimbursement as long as the product is in its original package and has not been applied. All damaged packaging will incur a $1.00 replacement charge. You must include your original receipt to receive a prompt refund. Returns must be shipped through a traceable carrier (ie. UPS, Fed Ex, DHL) otherwise Designer Cords will not be responsible for lost packages and a refund will not be processed.

- top -

 

In the Details

For visual instructions click on "See The Video" relating to your question.

See the Videos
Featured in Major Magazines!

info@designercords.com
p. 504-644-8477
f. 504-910-3016

Find a store near you!

Where did you find
out about us?